If you’re experiencing sewer problems, you know the inconvenience that issues like these can cause. Drain failures or clogs can’t just be irritating but can be expensive to fix. Inspecting the internal surface of your plumbing pipes assists you in seeing exactly what type of damage is causing you sewer problems, also allowing you to locate exactly where the damage is to facilitate the repair process.
Here are three tips that you should take into consideration when searching for a drain camera for rent in England to make sure you invest in a diagnostic tool that meets your needs.
Tip 1: Look for a camera that can span the length of your pipes
Before renting a sewer camera from your local hardware store, finding out how long your main drainage pipe is can be quite helpful. This pipe connects the plumbing system of your home to the municipal sewer system.
You can consult the original building plans of your home to find out how long the main drainage pipe is. Then, you can use this information to rent a sewer camera with a feedline that’s long enough to run the length of the pipe. This makes sure that you’ll be able to inspect the whole pipe thoroughly to check for damage that could be contributing to the sewer problems of your home.
Tip 2: Look for a camera that has a self-levelling feature
When you’re using a sewer camera to inspect the interior surface of your plumbing pipes, it can be difficult to determine exactly what you’re looking at. When the images produced by the camera are askew or upside down, it can be almost impossible to identify damaged areas.
By investing in a proper sewer camera, which has the ability to level itself, you can ensure that all the images acquired from this camera are upright. This feature further enables you to inspect your plumbing pipes more easily for serious damage.
Tip 3: Look for a camera with a video-out connection
If you’re finding it difficult to identify whether or not your plumbing pipes have sustained damage, it can be helpful to have a professional plumber evaluate the footage that your sewer camera outputs. When renting a camera with a video-out connection, you can record the images that your camera captures onto a different video device.
This enables you to retain a record of the findings of the camera, and it also allows you to get the expert opinion of a plumber without having to pay for the plumber to conduct a different session with a sewer camera.
If you’re able to rent the right sewer camera, it would significantly assist you in fully leveraging the diagnostic tools. So, look for a camera with self-levelling abilities, a camera that can span the length of your main drain pipe, and a camera with a video-out connection to assist you in identifying sewer damage in the future.
If you’re looking for a CCTV drain camera in England, let Scanprobe know. Plus, we also offer a Mina survey in England. Please explore our website to know more or call us at +44 (0)203 253 2001 to get your queries answered instantly.
Since its inception, Scanprobe has made a constant push to be a technology leader. Their ability to adapt quickly and spot trends are what has made them so successful. Now, they’re working to empower their customers with mobile tools to set them up for success. One example of this is the Mina survey in England, read on to find out about it.
What is Mina?
Mina is one of the main components of the digital transformation of Scanprobe. Simply put, it’s an app that augments and complements their current drain surveying hardware.
Mina has two important components. The first one is designed to offer surveyors the ability to view live video feeds from their drain surveying devices while controlling hardware features like lights via direct Wi-Fi connection. The second is to provide surveyors with the ability to map out the site and annotate it, allowing them to capture more detail regarding the survey for later reference.
The mobile device application of Mina is developed to complement the pipeline and drainage inspection engineer of today. Here are some of its offerings:
Where do we start? From duplicating the screen to either minimising costs by not requiring an additional engineer to man the camera or display the job in hand to your customer, through to being able to make your detailed map a part of your survey, you can offer absolute certainty to your customers in a simple manner, and at no extra cost.
Use your Wi-Fi to link your smart device to your push-rod camera system, and you’re up and running with mina! From here, you’re able to use your tablet or smartphone to view the display of your camera while fully leveraging the standard functionality of your device, including email and MMS.
Whether the size or location of the job has separated you from your camera box, or just because you want to show your customer exactly what the fix or problem looks like in real-time, you can. With Mina, the display can be duplicated, and even have certain control over the camera.
Ever had to detail where the manhole was, or try to explain precisely where you were, along with where the key points along the way were and where you surveyed? Well, with Mina and its industry-recognised icons and integrated Google Maps technology, you can develop concise and clear maps, adding them directly into your survey.
What are its features?
- Currently available on both iPads and iPhones.
- Google Maps are used to easily and clearly plot the key markers from the survey.
- Create drawings by drawing on top of the Google Maps image by inputting industry-recognized symbols.
- Wirelessly connect your tablet or smartphone device to your Wi-Fi enabled pipeline inspection camera system to increase the survey value and functionality.
- Share your survey using any file sharing app on your smart device, including Dropbox, email, and WhatsApp.
- Easy to use; just connect and go. This application is developed to make your life easier.
- The icons are labelled and pre-made for you, and no doodling is required. Just drag and drop them in.
- After you’re done, simply connect to your pipeline inspection system and upload your detailed drawing directly into your survey to add a bit of detail and clarity to your survey, and stand out from the rest.
If you’re looking for a CCTV drain camera in England, contact Scanprobe now!
The sewer inspection cameras are extensively utilised by home inspectors, engineers, contractors, plumbers, municipal workers, and other professionals for inspecting regions that aren’t easy to spot. These regions may comprise insides of a drain, spaces behind walls, pipeline interiors, and other hard-to-reach places. So, if you want to buy a sewer inspection camera, you first need to consider your sole purpose of using it. How long should the insertion probe be? How much light will you require? Should it be chemical or waterproof?
In order to choose a good sewer camera, we’re offering you a few general tips. However, remember that the final decision should only be yours, based on your particular budget, requirements, and needs.
- A radio transmitter will be a good addition to the camera. Generally, it operates on 512 Hz frequency mode and is located behind the camera in the tip of the probe. It’s a great tool to find blockages or locate your camera. Make sure you’re equipped with a precise locator to trace it.
- These surveys can be undertaken in all types of weather, so being waterproof and easily visible in direct sunlight would be very beneficial.
- Similar to the insertion probe, the camera should at least be waterproof to last the duration of your survey.
- Since inspecting hard-to-see areas is what you’re planning, you’ll need a varying degree of light to explore it. The image will be better with a brighter light source. Always go for a sewer inspection camera that has a bright, adjustable LED light.
- If the pushrod with an attached camera is chemical and waterproof and is able to withstand a bar pressure of 1-6, it will offer longevity to your device.
- This probe must at least be long enough to go from one maintenance hole to another. The length of our probes varies from 40m to 120m.
Control box/Monitor display
- The contemporary sewer inspection cameras can capture various types of files with various resolutions. Try saving the footage as either a video in AVI or MPEG format or as a JPEG file. If you can record images on your computer, convenience is guaranteed. This is because you won’t have to remember it or write everything down. Furthermore, should you or your client need to verify some information, you can always go back to the file.
- The screen should offer you a coherent picture of the inspection area. In this case, a higher resolution and a wider screen are preferred. The daylight readable monitor comes with a pro model.
- Few modern inspection cameras comprise keyboards (maybe splash-proof on the PRO models) that permit you to type useful information during inspections.)
Looking for a sewer, drain, or a CCTV drain camera? Awesome. Browse the offerings of Scanprobe, and you’ll know why we’re the best when it comes to these devices.
The blockage is one of the biggest fears about pipework . For many years, the pipes will tirelessly work to remove waste and water from your building like silent, cylindrical heroes. But when you get a blockage, it can be costly, disruptive, and worrying. Often, pipes are buried beneath the ground, so getting to them and identifying the root cause of the blockage can prove to be a tricky proposition.
With a pipeline inspection camera, all your worries are taken away, allowing you a plethora of benefits to both you and your building. Here are some:
Pipeline inspection limits the excavation, often saving it all together. Thus, your environment is saved from unnecessary disturbance.
The pipeline inspection camera is non-invasive and gentle, ensuring that no harm is caused while you’re busy fixing the problem. Majority of the other options will merely give you more problems, and if you have a pipe that’s already under stress, expect more challenges. Pipeline inspections must be carried out by professionals only so that pipe isn’t disrupted much.
Precision and accuracy
You can inspect your pipes using a 360-degree camera, giving you the view you really wish. No guesswork is prerequisite. You get precise data with which to make decisions. Therefore, problems in your pipes are located and discovered with tremendous speed and without any further damage to your pipes, which can save you time and money on unnecessary work or future repairs.
Pipeline inspection allows you the opportunity to look at your pipework and spot any issues that may arise before they become a huge problem. In its lifetime, there’s a lot more that could go wrong with your pipe. Therefore, having a clear view of what’s happening and keeping on top of maintenance is important. Some of the dangers that your pipe may be subject to comprise roots or tree leaves, wipes and toiletries, foreign objects, hair, and grease. These are quite normal. However, if they are left untreated, they may lead to bigger problems. Pipeline inspection camera gives you the full picture. Thus, preventive repairs may be conducted, saving you a lot of future headaches.
Prompt problem identification
Pipeline inspection camera inspects the entire pipe. If a problem is found, you’ll know it through the camera. This then eliminates all the guesswork, ensuring you’re presented with the problem first time around. Thus, you would be able to avoid any unnecessary costs that come with incorrect problem diagnosis, leaving you to pay for the problem, not the research!
Why are pipeline inspections the best route to success?
This is because they are:
- Quick: Isolates the problem without a fuss.
- Clean: No digging is required.
- Convenient: Can detect the problem without a hassle.
- Effective: The cameras have 360-degree vision.
- Reassuring: The problem is fixable right way.
Looking for experts?
If you’re looking for a pipeline or wireless inspection camera, Scanprobe is definitely the way to go. By making an inspection camera available for hire, we ensure that your needs are met – whatever they are!