Imagine this: You’re kneeling in dry, dusty grass right beside a cleanout, pushing your Scanprobe pipe inspection system slowly down into the drain. The pushrod is a little bit slippery, but thankfully stiff; it’s flexible enough to enable you to tackle the 90-degree turn at the base of the cleanout and then coax it in the street direction. The lawn seems to be enormous. The customers’ drains and toilets back up almost every time it rains, and you’ve confirmed that everything between the cleanout and the house is flowing normally. Under the lawn lies your problem, and it’s certain to involve a leaking or broken pipe.
It occurs to you that you’re propelling a video camera into what’s certainly a damaged sewer pipe. What could possibly go wrong? As it turns out, plenty.
While this imaginary scenario seems relatively controlled and safe in comparison to certain camera applications that we’ve heard about over the years, contractors damage their drain inspection systems in similar scenarios on a daily basis. It is simple to do and costly to correct, so let’s discuss the three most usual suspects and witness what we can learn.
Wearing the pushrod on the sewer entry
The pushrod itself is comprised of some tough and durable materials, designed to handle the tough terrain that comes with sewer inspection, so you needn’t treat it like your grandma’s fine china. Equally, it will eventually wear down to the data-carrying wires inside, and when that happens you can expect your camera system to be out of action whilst it is being re-ended. So take a little care where you can. When entering a pipeline at a harsh angle, try positioning a spare piece of pipe into the pipeline entry to soften the entry angle and stop the pushrod from rubbing & wearing on the top edge. Placing a piece of un-used liner over this section of the entry point will also reduce the wear & tear on the rod and enhance the lifespan of your drain camera.
Kinking the pushrod while you thrust it into the pipe
Numerous camera repair centers report that kinks usually occur in the first few feet of the push rod. This can happen when the pushrod is inserted with excess force, especially when there is a blockage or a tight bend to navigate. It may also happen when the operator tries to stand, instead of crouch or kneel beside the drain opening. If you allow it too much room to roam, the pushrod may bow out and kink right before your eyes.
This would be both expensive and embarrassing. Based on the severity of the problem and the brand, a re-termination on a standard pushrod can be costly, as it takes your camera system out of operation whilst it is being repaired.
Our advice is: Slow down, keep your hands low, and as close to the drain as you can. Watch where you’re going and use fast, short motions to get around a blend. Focus!
Damaging the camera head
The camera head is one of the more expensive parts of the pipe inspection system, and often the most vulnerable. The majority of damaged camera heads that arrive at repair centers have a light ring or a cracked lens cover, presumably the consequence of being used as tremendously costly battering rams. The video camera in your pipe inspection system isn’t much different from the one that you used to record the wedding of your eldest cousin. The guts are the same, but it may have been sealed in a stainless steel protective case behind a cap cover of sapphire lens. The LED lights are hidden behind thick glass, and the whole thing is either epoxied or pipe threaded to the end of the pushrod, so it’s sealed up like a tomb in Egypt. While this sounds impressive, all of that is no defense for a drain cleaner who is overly enthusiastic and keen to both identify and clear the blockage with the camera, rather than a more appropriate tool.
Our advice is, don’t use your pipe inspection system as a drain cleaner. You have other tools in your truck that are much less expensive to repair and are much better suited for that task. Don’t blink your eyes when looking at the monitor. If the camera head is approaching a foreign object, a break in the pipe, or is underwater, approach with caution and complete your survey as best you can so you can diagnose the problem. Pay attention, be careful.
Besides these two calamities, are there other ways to damage your camera system? Well, of course. From accidentally getting the camera head stuck in the pipe to kinking the pushrod a hundred feet down the line, there are a plethora of problems that can pop up in the life of a camera system. However, tackling the above will substantially lessen the odds of having a mishap related to the camera ruin your day.
Over the years, we’ve noticed that certain contractors rarely see their camera systems go down for repair, while others seem specifically hard on them. The majority of plumbers and cleaners lie in the middle range, experiencing occasional problems. The important takeaway here is that repair centers see a coherent association between frequency and technique of repairs. Live and learn!
Whether you’re looking for drain cameras for sale or want a drain camera for rent, let Scanprobe know!
If you want your plumbing systems to function correctly, sewer channels need to be free of obstructions and buildup. This way, the wastewater can be taken away from residential and commercial buildings. Unluckily, there are channels within the comprehensive sewer network that aren’t accessible to expert plumbing contractors or city employees like yourself.
Advanced sewer cameras should be used to inspect pipes; to see where the buildup lies. These applications may be fed through both small and large pipes and show you just what you’re dealing with in high definition. Although it may sound as if drainage camera systems are one-size-fits-all, that isn’t always the case. With numerous types of inspection cameras to select from, it’s important to understand which models are ideal for the type of setting that you work in. Please read this blog and learn how you can differentiate between various options.
Small video nozzles for easy problem assessment and portability
If portability is a big worry and you want to evaluate a job without needing to have your crew by your side, an investment in a video nozzle can be wise. This is mainly for jetters who want to see what they’re jetting before they report to the site to do the work. It may also be used to find out the source of a particular problem, to evaluate if other pipe maintenance is required, and to understand what hazards may be present. Since it’s easily portable and small, it can be carried on any truck. However, you’ll need to review the footage later on a tablet or computer.
The camera system on wheels
Crawlers, which are also known as mobile drainage camera systems, are essentially the RC car of sewage camera inspection systems. If you’re frequently performing repairs or jetting pipes deep in complex sewage systems, wheeled sewer cameras may be a very good choice. They aren’t just fun to operate but are also equipped with HD video cameras and on-board sensors that make it possible to discover problems that are difficult to identify without requiring a CCU.
Push cameras for inspection with the smallest pipes in the network
Small-sized pipes are vulnerable to clogs. If you document, record, and view the conditions of a small pipe, a push camera inspection system will be perfect. While it resembles a garden hose, it’s equipped with video capabilities and internal memory, allowing you to see what you’re dealing with in real-time. Selecting a camera system that will be practical for the work that you take on is vital. If you’re still confused, you can always ask for assistance from respected sewer equipment vendors, a decent drain camera manufacturer like Scanprobe.
Did you recently move into a new house and just want to check it out, or is poor drainage bothering you, and you’re not sure what the problem is? If yes, try hiring someone to carry out a CCTV survey of your property drains. This survey will enable you to identify your drains need repairing or blocking.
Usually, these types of surveys are carried out before people move into a new property. During the survey, a professional camera engineer is tasked with conducting a full drain survey in one day, inspecting every pipe and drain, letting you know if there are any repairs that may be required to prevent blockages in the future. During the survey, minor blockages can be removed, the cost of which will be added up in the final receipt.
Drain surveys: Things to consider
Drain surveys can be quite useful in identifying any blockages and determining the condition of your existing pipework. Often, these surveys are used to diagnose drains that keep blocking, even after a pressure wash cleaned them. The most prevalent drain problems that cause blockages are collapsed or cracked pipes, which are, in turn, caused by tree roots, deterioration of the materials, or by other accidental excavation.
In the past, CCTV inspections were quite costly. However, in recent years, the cost of this technology has come down significantly. So, be wary of over-the-top survey prices; even a large drainage system shouldn’t cost more than a few hundred points, with the average cost being far less.
Precisely check what’s included in the prices. Some firms will clear minor blockages during the survey without charging anything extra, whereas others will charge additional. So, when you’re comparing quotes, ensure that you’re doing it right.
Can I do the drain survey myself?
A drain survey is an excellent way of locating any problems and checking out your drainage system. So, you may be wondering that you could perform a drain scan yourself instead of using a professional service, thereby saving a lot of cash. But is it worth it? First of all, these surveys aren’t expensive to start with, usually costing less than a hundred pounds, so you’re not saving a fortune. Secondly, professionals will be fully equipped with drain rods and industrial standard cameras, when doing such a survey, you’ll likely have to hire or purchase this equipment to tackle the survey.
Then you require the experience to identify the problem after fully understanding the footage. Also, jetting equipment to get rid of any small debris you come across. While you could purchase the equipment on eBay and hope for the best, cheap setups are likely to malfunction or break, ending up as a big waste of money and time.
Also, you need to know how to use drainage rods properly otherwise you could even potentially end up leaving equipment in your drain, causing extra blockages for which you’ll have to pay an expert to get rid of. So it’s not that uncommon, and possible, for DIY drainage jobs to end up costing more money than hiring the experts in to do the job in the first place.
Drain survey tips
- In recent years, the cost of CCTV surveys has dropped substantially
- It’s not worth tackling this as a DIY job
- Many firms will remove minor blockages and debris as part of the survey
- Before purchasing old property, it’s a good idea to have a drain scan carried out
If you’re looking for a drainage camera or a drain camera manufacturer, don’t worry, Scanprobe has got you covered. Contact us now, and one of our friendly customer service representatives will be glad to assist you.
To sustain and prolong the condition of your drains, it is important to be aware of what’s happening inside your pipes. A drain scan is the best way to do it.
What’s a drain scan?
In simple words, a drain scan is a detailed inspection of your drainage system using high-tech cameras that are inserted into your drains. These drainage cameras send real-time feedback, letting your drainage engineer gets a good look into your drains to identify any issues.
Why and when would a scan be required?
In any situation, drain scans are an indispensable tool. For instance, before purchasing a new home, a pre-purchase drain scan may be arranged. The scan will generate an accurate review of the present condition of the drainage system of the property and will offer an overview of any potential repairs in the future. The scan offers buyers the chance to make a fully-informed decision before signing any contract.Tenants or homeowners may also require a drain scan when they face ongoing or one-off drainage issues. A scan may discover the root cause of a problem, so they’re vital if you’re experiencing drain troubles but have little idea why.
What equipment is used?
During the scan, the following equipment may be used:
- Access rods: They are known for their flexibility, and are used to push the cameras along your drainage system, assisting them in navigating corners and tight turns.
- Crawlers: The remote-operated crawlers are utilised to offer quick visual access to sewer systems, offering exceptional quality even in obstructed pipes.
- Sonar units: These scans are reserved for filled pipes, offering acoustic profiling to acquire insight into the condition of the pipe where visual access is impeded.
- Drainage camera: This state-of-the-art drainage camera must operate in tight spaces and under flowing water. It offers engineers with a clear view of your drains, including areas that would be impossible to see otherwise.
What will a scan find?
The short answer is, it’ll cover any drainage issue you could possibly have.
Drain scans are designed to deliver a thorough, extensive review of your drainage system. They can assist you in identifying minor and major issues alike. From fatbergs to structural damage, whatever the problem with your drains, a drain scan should be able to identify and locate it. A drain scan can help to identify:
- Animal intrusion
- Causes and extent of bursts/leaks in pipes
- Collapsed drains
- Evidence of poor installation or displacement
- Tree root ingress
- Wear, tear, and corrosion
While a drain scan has a ton of advantages, being able to respond to current issues and plan ahead to prevent future ones is its main offering. In the long run, this assists in saving you money – and a bit of frustration too.
WinCan turns your data into decisions
WinCan VX transforms how you make decisions based on the rich data that inspection technologies of today capture. Imagine an integrated, single application offering you the power to manage your assets and resources in real-time.
Analyze: To understand maintenance needs, it runs queries on any combination of criteria. You can get results in the form of raw data, on a map, or in reports.
Budget: Manages inspection workflow, anticipates maintenance, makes budgetary projections, and allocation resources based on infrastructure condition.
Comply: Collects standards-compliant data for export, reporting, and analysis. WinCan supports over 50 defect catalogs, including WRc and MACP/PACP.
Decide: Extracts the actionable intelligence you need to make critical maintenance decisions.
Integrate: Interfaces with every major GIS platform and municipal databases, and connects with any inspection equipment.
Report: Uses schematic illustrations, photos, and filtered data to generate information-rich reports.
Share: Securely publishes completed inspections to the clouds, where clients can use a web browser to view them instantly.
WinCan is cloud-based and offers secure global success
New WinCan Web keeps your inspection data current, accessible, and secure on the cloud. How does this benefit you? Here’s how:
- Access: Authorized parties can access the most recent inspection data instantly using any device with a web browser.
- Competitive: To lower operating costs, large firms can offload IT functions, with small contractors delivering results with previously unavailable quality and speed.
- Scalability: Subscribers just pay for the storage they require and may increase that storage anytime.
- Security: Administrators may precisely control who accesses what information. To protect against data loss, the data center of WinCan provides the necessary hardware redundancy.
- Workflow: Supervisors may automate the assignment of inspection tasks, along with how inspection results are shared and compiled in real-time.
WinCan is designed to be scalable, to be able to grow with you
WinCan VX allows you to invest in the functionality you need today, and then add capabilities and bandwidth as future needs arise.
- Modules: These extensions to the core application allow you to add particular capabilities as needs arise.
- Subscriptions: With a subscription, you can license WinCan for a flat annual fee while gaining access to training, support, cloud storage, and every software update.
- Value bundles: These famous combinations of add-on modules and core functionality provide savings over individually bought components.
WinCan is innovative, offering you the advanced capability
WinCan is supported by the largest user base of the market, investing in the R&D necessary to offer innovation ahead of the competition. So whether it’s new analytical tools, new ways to inspect, or new support for downstream processes like rehab and cleaning, you can trust WinCan VX to lead the market.
- 3D: The 3D visualization technology of 3D allows you to build a virtual model of your infrastructure based on measurements collected during inspection.
- Competitive: The GIS implementation of WinCan VX makes it easy to manage infrastructure using maps as the front end. To create entire WinCan projects with pre-populated section data, just click and drag on a map.
- Scanning: The ScanExplorer module allows you to navigate and interpret data from the laser and side-scan inspections via its four-synchronized views.
WinCan allows you to collaborate, providing you with optimum teamwork
Teamwork and process – both are imperative for managing your wastewater collection network effectively, from cleaning and inspection to replacement, rehab, and maintenance. WinCan VX implement best practices of the industry, seamlessly coordinating your workflows and personnel. With WinCan Web instantly sharing inspection results, your decisions are always based on the most current, complete data.
What’s the wait now? Contact Scanprobe and get your WinCan drain camera instantly!
The sewer inspection cameras are extensively utilised by home inspectors, engineers, contractors, plumbers, municipal workers, and other professionals for inspecting regions that aren’t easy to spot. These regions may comprise insides of a drain, spaces behind walls, pipeline interiors, and other hard-to-reach places. So, if you want to buy a sewer inspection camera, you first need to consider your sole purpose of using it. How long should the insertion probe be? How much light will you require? Should it be chemical or waterproof?
In order to choose a good sewer camera, we’re offering you a few general tips. However, remember that the final decision should only be yours, based on your particular budget, requirements, and needs.
- A radio transmitter will be a good addition to the camera. Generally, it operates on 512 Hz frequency mode and is located behind the camera in the tip of the probe. It’s a great tool to find blockages or locate your camera. Make sure you’re equipped with a precise locator to trace it.
- These surveys can be undertaken in all types of weather, so being waterproof and easily visible in direct sunlight would be very beneficial.
- Similar to the insertion probe, the camera should at least be waterproof to last the duration of your survey.
- Since inspecting hard-to-see areas is what you’re planning, you’ll need a varying degree of light to explore it. The image will be better with a brighter light source. Always go for a sewer inspection camera that has a bright, adjustable LED light.
- If the pushrod with an attached camera is chemical and waterproof and is able to withstand a bar pressure of 1-6, it will offer longevity to your device.
- This probe must at least be long enough to go from one maintenance hole to another. The length of our probes varies from 40m to 120m.
Control box/Monitor display
- The contemporary sewer inspection cameras can capture various types of files with various resolutions. Try saving the footage as either a video in AVI or MPEG format or as a JPEG file. If you can record images on your computer, convenience is guaranteed. This is because you won’t have to remember it or write everything down. Furthermore, should you or your client need to verify some information, you can always go back to the file.
- The screen should offer you a coherent picture of the inspection area. In this case, a higher resolution and a wider screen are preferred. The daylight readable monitor comes with a pro model.
- Few modern inspection cameras comprise keyboards (maybe splash-proof on the PRO models) that permit you to type useful information during inspections.)
Looking for a sewer, drain, or a CCTV drain camera? Awesome. Browse the offerings of Scanprobe, and you’ll know why we’re the best when it comes to these devices.